Binocular Accessories

BINOCULAR TRIPOD ADAPTER by SOLIGOR

Practical accessory to fix binoculars on tripods with ¼" tripod mount. The adapter is well suited for all binocular types especially roof prism designs. It is simple to operate and of attractive design. Your binocular will be fixed safely for more viewing comfort.

SPECIFICATIONS:

- Tripod screwmount with ¼" screw
- Measurements 88x70x40mm
- Weight 68g
£1?=00

BINOCULAR TRIPOD MOUNT by OPTICRON

This accessory is designed to be used for large binoculars of over 50mm objective size.

SPECIFICATION:

- Tripod screwmount with ¼" screw
- Heavy duty design
£12=00

THE STAR-RAKER Parallel Motion Binocular Mounting

The sheer splendour of the night sky viewed in large aperture binoculars is an experience few will forget. Used with a good-quality pair of binoculars and a full height tripod, the observing comfort of the Star-Raker makes exploring the sky at night a pure pleasure.

Ideal for group viewing: One of the main benefits of the "parallel motion" design of the Star-Raker is that the mounted binocular or telescope retains the same angle relative to the ground for any change in observing height. It sounds complicated but this means you can centre a target in the eyepiece and simply move the perfectly balanced binocular vertically up or down to the height of the next viewer, and the target will still be perfectly centred - even for children!

The Star-Raker uses a retained counterweight system to allow it to be quickly balanced for use with a wide range of instruments. From large binoculars (up to 3kg with standard weight - more with other weights available separately) to small telescopes and spotting scopes. The Star-Raker must be mounted on a suitable tripod (see below) and it has a base that can be attached to photo-tripods using a 3/8" BSW fitting screw.


£284=00

HOME